POR-15 Stop Rust Kit for Non-Porous Metal

The POR-15 3-Step Stop Rust System is designed to permanently halt rust on metal surfaces, ensuring the best results when applying POR-15 Rust Preventive Coating. The clear-cut process allows for the proper cleaning, prepping, and coating of metal, creating a non-porous surface that seals and protects the metal from water, chemicals, salt, and other corrosive contaminants.

The POR-15 Stop Rust Kit covers a 6 square foot area with two coats, making it ideal for small projects like sub-frames, axle replacements, control arms, brake shields, and more. This kit contains POR-15 Cleaner Degreaser, POR-15 Metal Prep, POR-15 Rust Preventive Coating, paint brushes, latex gloves, and detailed instructions.

When handling these products, it is essential to wear gloves, eye protection, and a properly fitted respirator. The first step is to remove loose rust with a wire brush, apply POR-15 Cleaner Degreaser to the surface, and keep it wet for 10-15 minutes before rinsing thoroughly with water and allowing the surface to dry. For areas with noticeable build-up, use a stiff brush to break up the material and continue to keep it wet with the Cleaner Degreaser.

In the second step, apply POR-15 Metal Prep to the bare metal surface, keep it wet for 10-15 minutes, and then rinse thoroughly with water, allowing the surface to dry. It is important not to allow the Metal Prep to dry on the surface prior to rinsing. Once dry, the surface may show a flash rust or white powdery residue, which is perfectly normal. POR-15 Metal Prep provides the best surface profile and greatly improves paint adhesion to any type of metal surface.

The final step is to apply two thin covering coats of POR-15 Rust Preventive Coating. Apply the first coat to the properly prepared substrate with the supplied brush, and then apply the second coat when the first coat is almost dry, slightly tacky to the touch. If the coating is applied too heavily, brush marks may result in the finish. Do not apply this product if the humidity is above 70%, as it may cause small bubbles in the finish.

POR-15 Rust Preventive Coating requires a top coat only if exposed to direct sunlight. For top coating, use POR-15 Top Coat or their two-part topcoat, POR-15 2K Urethane.

The POR-15 Stop Rust Kit is an excellent choice for those looking to permanently stop rust and protect their metal surfaces. Tested to 450°F and exceeding a 2,000-hour salt spray test, this kit is also resistant to acid and alkalis, and will repel fuels and oils. POR-15 is trusted by DIY enthusiasts and professionals alike, and the company is committed to innovation, quality control, and excellent customer service.

product information: